Hemming
Die set No.35 & No.58 are a standard set that can form light material hems in two operations.
Die set No.131 & No.132 are a three high hemming die set recommended for mild steel 18 gauge and lighter.
Die set No.133 & No.134 is used to form a standing seam in two operations.
Die set No.131 & No.132 are a three high hemming die set recommended for mild steel 18 gauge and lighter.
Die set No.133 & No.134 is used to form a standing seam in two operations.
No.35 & No.58
No.131 & No.132
No.133 & No.134
Die set No.135 & No.136 is used for high production in hemming wide sheets. Maximum hem length is 3/4″. This die set is recommended for 20 gauge and lighter. Capacity can be increased to 18 gauge by extending the anvil and adding an adjustable angle to the lower section.
No.135 & No.136
Die set No.240 & No.241 are a three high hemming die set shown with an equalizing back heel for higher production and heavier material.
Die set No.242 & No.243 are used to produce lock seams in two operations in one handling.
Die set No.242 & No.243 are used to produce lock seams in two operations in one handling.
No.240 & No.241
No.242 & No.243